Top 10 Makita Track Saws 2020 Reviews

Are you in need of a new makita track saw but unsure where to start? Maybe you’re confused about what features are best for your job needs or you’re just overwhelmed by the large range of available products. This list is composed of ten track saws thought to be the best in the market and will help you to decide what product fits your needs.

10. Makita XSH08Z 18V x2 LXT Lithium-Ion

Makita XSH08Z 18V x2 LXT Lithium-Ion

This makita track saw base is powered by two LXT batteries and is compatible with a guide rail to perform perfect guided cuts. It needs no cord while providing more power through the use of x2 technology. With a 50 percent longer run time, Makita is electronically controlled by a BL motor delivering 6000 RPM for every charge. The saw runs longer with a longer life span because of a higher efficiency through it’s brush less motor that eliminates the need for carbon brushes. You can expect the best performance through it’s modern technology which provides an automatic speed change with adjusting cut speed and torque.

9. Festool 575387 Plunge Cut Track Saw

Festool 575387 Plunge Cut Track Saw

The Festool uses guide rails to perform accurate, self guiding cuts that are splinter free. The material does not pinch the blade thanks to it’s spring loaded riving knife which keeps the cut kerf open thereby reducing kickback. A fastfix system makes for simple arbor bolt removal by locking switches and arbor at the same time. It also makes changing the blade a lot easier. The power consumption for this particular track saw is about 1200 watt.



The Dewalt DWS520K includes a clearance track saw system that allows for consistent, even cuts. The cuts can be done in either direction and will still achieve the same results. However, different depths will provide different sizes. For instance, a 90 degree angle will produce a 54mm cut while a 45 degree angle will achieve a 41mm cut. This track saw comes with a powerful 1300W motor that plows through hard wood material with ease; up to 2-1/8 inches thick. This track saw prevents kickback thanks to it’s Anti-Kickback mechanism and riving knife. The low profile blade guard also allows the saw to be used in narrow spaces. The zero clearance track saw cutting system keeps this tool providing perfect cuts that are precise and even. The dual-edged tracks keep the saw creating straight, even cuts in either direction.

7. Makita XPS02ZU 18V X2 LXT Lithium-Ion

Makita XPS02ZU 18V X2 LXT Lithium-Ion

The Makita XPS027ZU operates on two LXT batteries that deliver an ideal amount of power and speed plus provide a longer run time without the aggravation of a cord. You will need to purchase these batteries separately, however. The brush less motor provides 6, 300 RPM which gives the best possible performance and a 50 percent longer operational time. The 5.0Ah batteries utilize x2 LXT technology to give up to 125 cuts per charge and supply 4×8 sheets of 1/2 inch plywood. This track saw is best for large wood panels, melamine and MDF, aluminum, and Corian. Optionally, you can switch blades for other materials but you must purchase them separately. Bluetooth technology provides a unique delivery of power communication between the track saw and dust extractor through the automatic-start wireless system or AWS.

6. Makita XSR01PT 18V x2 LXT Lithium-Ion

Makita XSR01PT 18V x2 LXT Lithium-Ion

The Makita XSR01PT also runs on LXT Lithium Ion batteries for a new technology that gives more power with every cut. With a 50 percent longer run time the Makita is built with a controlled BL motor and deliver 5,100 RPM to achieve maximum performance. There is no need for carbon brushes thanks to the BL brush less motor which gives the motor the ability to run cooler and for a longer time. The automatic speed change technology allows for adjustments to the cutting speed as well as the cut to give it the best possible performance. When performing 2×4 SPF lumber cuts the Makita delivers up to 558 cross cuts while the 2×10 SPF lumber cuts can achieve 291.

5. Makita 5377MG

Makita 5377MG

The Makita 5377MG can deliver up to 4,500 RPM because o its 15.0 AMP motor which utilizes compressed winding technology for a more compact overall size and durability. The saw is lightweight because of its magnesium material and provides a balanced and tough performance. It contains a retractable hook that lets the saw remain close without being in the way. The hypoid steel gear are of high quality preventing premature wear as bronze-alloy worm drive gears typically do. You can expect less maintanenance because of the oil bath technology that is used with a built-in fan and sealed gear housing which guarantee 100% oil surface coating. The rubberized levers allow for fast and one handed adjustments while the rubber grip handle give you more control and a better fit.

4. Makita XPS01PTJ

Makita XPS01PTJ

This powerful track saw uses x2 LXT technology for more speed and longer run time without the interference of a cord. The Makita contains a BL brush less motor for 6, 300 RPM maximum performance and a 50% longer run time that is electronically controlled. You can automatically adjust speed of cuts and torque for the best performance available. Further, the speed can be adjusted using the variable speed control dial ranging from 2,500 to 6,300 RPM on an array of materials. Lastly, you can perform close to the wall cutting for greater cutting applications.

3. Makita XSH04ZB

Makita XSH04ZB

The MAkita XSH04ZB contains a compact and ergonomic blade design that is only 10-5/8 inches long and weight only 6.4 pounds. It utilizes a 0AH battery that needs to be purchased separately but offers better control. The electronically controlled BL motor provides 5,000 RPM for quicker cuts and ripping while operating at a powerful speed. You will have no need for carbon brushes since the motor is composed of BL brush less technology. It also allows for a longer life and keeps it cool. This track saw has a larger cut capacity at 2-1/4 inch and a bevel capacity of zero to fifty degrees.

2. Makita 5007Mg Magnesium

Makita 5007Mg Magnesium

Makita 5007Mg Magnesium contains magnesium components for a lightweight saw weighing only 10.6 pounds and is better balanced for a tough job site. The powerful 15 AMP motor generates 5,800 power for greater performance and durability. It has two built in LED lights that provide illumination on the cut line for appropriate accuracy. It has a greater cut capacity at 2 to 2 1/2 inches at 90 degrees and a bevel capacity of 0 to 56 degrees with stops at 22.5 and 45 degree. Lastly, you can eliminate satisfaction worry with the one year warranty.

1. Makita SP6000J1

Makita SP6000J1

The Makita SP6000J1 has a powerful 12 AMP motor to give it greater performance on an array of materials. It utilizes precision cutting technology to deliver splinter free mirror finishes. You can expect smoother cuts thanks to the maintenance of constant electronic speed control. There is a variable speed dial ranging from 2,000 to 5,200 RPM that allows the operator to match the speed to the application. Also, there is a larger cut capacity that ranges from 2 3/16 at 90 degrees and 1 9/16 inches at 45 degree cuts. This track saw has a cord that is 8 feet long.